Konica Minolta bizhub C31P - Manual (Page 245)

Configuring the Printer 227
Dynamic DNS If Enable is displayed, Dynamic DNS is
enabled.
If Disable is selected, Dynamic DNS is dis-
abled.
IPP If Enable is displayed, IPP is enabled.
If Disable is selected, IPP is disabled.
LPD If Enable is displayed, LPD is enabled.
If Disable is selected, LPD is disabled.
RAW Port If Enable is displayed, RAW Port is enabled.
If Disable is selected, RAW Port is disabled.
SLP If Enable is displayed, SLP is enabled.
If Disable is selected, SLP is disabled.
SMTP If Enable is displayed, SMTP is enabled.
If Disable is selected, SMTP is disabled.
SNMP If Enable is displayed, SNMP is enabled.
If Disable is selected, SNMP is disabled.
WSD Print If Enable is displayed, WSD Print is
enabled.
If Disable is selected, WSD Print is dis-
abled.
AppleTalk If Enable is displayed, AppleTalk is enabled.
If Disable is selected, AppleTalk is disabled.
NetWare If Enable is displayed, NetWare is enabled.
If Disable is selected, NetWare is disabled.
IEEE802.1x If Enable is displayed, IEEE802.1x is
enabled.
If Disable is selected, IEEE802.1x is dis-
abled.
Network
Information Type Identifies the type of network interface
installed on the printer (Ethernet 10Base-T/
100Base-TX/1000Base-T).
Ethernet Speed Indicates the transmission speed for the net-
work and the transmission method for bidi-
rectional transmission.
IP Address Identifies the IP (Internet Protocol) address
of the Ethernet interface.
IPv6 Link Local
Address Identifies the IPv6 link local address of the
Ethernet interface.
Item Description