Konica Minolta FK-502 - Manual (Page 92)

Transmission 3
bizhub 360 3-35
Tr
an
sm
iss
ion
Chapter 3
3.8 Manual Transmission
Manual Transmission
This operation is performed when sending documents and confirming the
status of the receiving machine.
1
Press [Fax] on the control panel to display the FAX screen.
2
Place the original.
– For details, see "Placing the Original on the Machine" on page 3-5.
3
Press [Off-Hook].
– If [RX] has been selected, press [TX] to switch to the transmission
mode.
4
Set the functions of Scan Setting as necessary.
– See "Setting Transmission Conditions" on page 3-10 for setting
functions on the FAX screen.
– See "Application Functions Overview" on page 7-4 for setting
functions on the FAX Application screen.
5
Select the destination with the keypad, [Program] or [Address Book].
– You can input up to 60 digits.
– Pressing [On-Hook] returns the display to the FAX screen.
– When an external telephone is connected, documents can be sent
by lifting up the receiver of the external telephone.
6
When the signal sounds, press [Start] of the Off-Hook screen.
– Pressing [Start] on the control panel allows the Off Hook Start Fax
communication screen confirmation to appear. Transmission starts
when you press [Yes].
– When the external telephone is connected, hang up the receiver of
the external telephone after pressing [Start].
Transmission begins.