Konica Minolta FK-502 - Manual (Page 189)

7 Transmission Applications
7-54 bizhub 360
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.21 Specifying the line for sending (Line Selection)
The setting can be made only when 2 lines are used.
If the Line 2 Setting of the Multi Lines Setting is set to [RX only], no line can
be specified. Refer to page 11-64 for more information on the Multi Lines
Setting.
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Press [Comm. Setting].
3
Press [Line Setting].
4
Select a line to be used in the [Line Selection].
– If you select [No Selection], a blank line is used.
5
Press [OK].
The Comm. Setting screen will be restored.
6
Press [OK].
The FAX screen will be restored.