Konica Minolta FK-502 - Manual (Page 304)

Utility Mode 11
bizhub 360 11-37
Utility Mode
Ch
ap
te
r 11
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
3
Press [Function Setting].
4
Press [Function ON/OFF Setting].
– If any function of [Memory RX], [Forward TX Setting], [Fax RX
Setting], or [TSI User Box Setting] is ON, other items are not
displayed.
5
Select the item you wish to set.
– To close the Utility Mode screen, press [Exit] in the sub-area.