Konica Minolta FK-502 - Manual (Page 160)

Transmission Applications 7
bizhub 360 7-25
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
3
Press [TX Stamp].
– To release the setting, press [TX Stamp] again.
4
Press [OK].
The Scan Setting screen will be restored.
5
Press [OK].
The FAX screen will be restored.
6
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-10 for
information about setting functions in the FAX screen. See
"Application Functions Overview" on page 7-4 for information
about setting functions in the Scan Setting or Comm. Setting
screen.
7
Designate the destination.
– See "Selecting One Destination" on page 3-19 for designating the
destination.
8
Set the original document.
– See "Placing the Original on the Machine" on page 3-5 for
information about setting the document.
9
Press [Start].
The FK-502 stores the document in memory before starting
transmission.