Konica Minolta FK-502 - Manual (Page 233)

10 Registering/Settings
10-22 bizhub 360
Re
gist
erin
g/
Set
ti
ngs
Chapter 10
10.4 Registering the Program
A destination (FAX number, User Box and E-Mail) to which a call is made
frequently can be combined with the [Scan Setting] or the [Comm. Setting]
that is used as the standard setting before they are registered in the
Program. With these information registered in the Program, just press the
Program key of [Program], and you can set the functions of the registered
destination and the [Scan Setting] or the [Comm. Setting] and send a
message.
-
When the optional hard disk has been installed, up to 400 addresses (001
- 400) can be registered for the [Program]. (If no hard disk has been
installed, up to 200 addresses can be registered.)
- Each Program can have a Program name.
The explanation here is given of the operation to register the Program, and
the operation to change the Program, and the operation to delete the
Program.
- No registration is available when [Name] and any one of [Scan Setting],
[Comm. Setting] or the Destination are not set.
- [Address Book], [Group] and [Program] can be also registered using the
PageScope Web Connection. Using the PageScope Web Connection,
setting can be changed or addresses can be registered from a computer
connected to the network.
Refer to the "PageScope Web Connection" on page 13-2 or User’s Guide
(Network Scanner) for the method to use the PageScope Web
Connection.
Registering the Program
The procedure for registering the Program is as follows.
1
See "Displaying the Fax Registration Screen" on page 10-2, to display
the Fax Registration screen.
2
Press [Program].