Konica Minolta FK-502 - Manual (Page 300)

Utility Mode 11
bizhub 360 11-33
Utility Mode
Ch
ap
te
r 11
11.11 TX/RX Setting
These are the options on the defaults of transmission and reception modes.
* indicates factory default setting.
*1
: The displays are different depending on the country.
*2
: To make the setting of [Print Paper Size] enable, set [Tray Selection for
RX Print] to [Auto].
*3
: Tray type may be different depending on the installed option.
Item Description Available value
Duplex Print
(RX) When set to ON, the original received is
printed on both sides of the paper.
Not indicated when [Print Separate Fax
Pages] is ON. OFF
*
/ ON
Inch Paper Pri-
ority Over A4
*1
By setting this function ON, inch series
form of paper is preferentially selected for
the received original. OFF
*
/ ON
Print Paper Se-
lection When the priority of each size is set:
A record is made in the priority size. When
no priority size is set, a record is made in
the nearest size.
When the fixing of each size is set:
A record is made only in the size set. Auto Select
*
/ Fixed Size
/ Priority Size
Print Paper
Size
*1 *2
Set the paper size on which the document
received is printed.
The default varies according to the setting
of [Inch Paper Priority Over A4]. A3 / B4 / A4
*
/ 8
1
/
2
Ч 11 /
8
1
/
2
Ч 14 / 11 Ч 17
Incorrect User
Box No. Entry Set the operation when an unregistered box
number is specified for the FAX reception
using boxes. Selecting [Auto Create User
Box] generates the box of a number en-
tered.
If the Password Rules are set to ON, the
[Auto Create User Box] cannot be selected.
Refer to "User's Guide Copy Operations"
for more information on the Password
Rules. Print
*
/ Show Error Mes-
sage / Auto Create User
Box
Tray Selection
for RX Print
*3
Determines the paper tray if you want to fix
the paper tray for received document. Auto
*
/ Tray 1 / Tray 2 /
Tray 3 / Tray 4
Min. Reduction
for RX Print
*4
Set the output magnification of the original
received. 87-96
*
/ × 1.0
Print Separate
Fax Pages Determines the default of transmission
mode.
Not indicated if Duplex Print (RX) is ON. OFF
*
/ ON
File After Poll-
ing TX Determines whether to delete document af-
ter the polling transmission. Delete
*
/ Save
No. of Sets (RX) Set the number of prints for the received
document. 1 * -10