Konica Minolta FK-502 - Manual (Page 176)

Transmission Applications 7
bizhub 360 7-41
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.15 Relay Transmission Request (F-Code TX)
Relay transmission request is the bridging of transmissions to several
destinations via an intermediate (relay) station. If the destinations to which
you intend to transmit are far, this function allows you to cut down the
communication costs. You can organize groups of stations, each of which
consists of one relay station and several destinations.
!
Detail
To use this machine as an intermediate relay station, the Relay User Box
should be registered by setting the [Relay RX] to ON in the Function
ON/OFF Setting in the Utility Mode. For more information, refer to
p. 10-53 and p. 11-36.
By setting the [Relay Print] of the Function ON/OFF Setting to [ON] at the
intermediate relay station, a document relayed after the relay distribution
is printed. Refer to p. 11-36 for more information.
Relay Transmission Request
0 Specifications
Relay TX Req can be used only when the Relay TX Req feature is enabled
in the Utility Mode. For details, see "Function Setting" on page 11-36.
We define the originating station as that which issues a relay request, the
relay station as that which relays transmissions, and the terminating
stations as that which receive and terminate communications.
To use Relay TX Req, a Relay Box No., relay password and destination
group No. must be defined at the relay station.
Relay TX Req can be used only when the relay station incorporates the
F-code feature.
Originating Station
Terminating Station
Terminating Station
Intermediate relay station
Toll call
Local call