Konica Minolta bizhub C451 - Manual (Page 91)

2 Using copy functions
2-48 C451
Using copy f
unct
ions
Chapter 2
*1
Settings can be specified for trays 1 and 2. In
addition, [12-1/4×18 w] is available.
*2
If paper other than the specified paper size is
loaded, a paper misfeed may occur since the paper
size is not automatically detected.
*3
In order to specify a custom paper size in Enlarge
Display mode, the custom paper size must first be
stored before entering Enlarge Display mode. For
details, refer to the User’s Guide [Copy Operations].
*4
By specifying paper one size larger than the
document as wide paper, the document can be
copied at the center so that there is no loss of the
document image.
The following procedure describes how to specify the
size of the paper loaded into the bypass tray.
1
In the Basic screen, touch [Paper].
The Paper screen appears.