Konica Minolta bizhub C451 - Manual (Page 59)

2 Using copy functions
2-16 C451
Using copy f
unct
ions
Chapter 2
2.5 Selecting document and copy
settings
The type of document and copy can be specified.
The following document and copy settings are
available.
*1
If “1 > 2” or “2 > 2” is selected, specify the binding
margin position for the copy and the orientation of
the loaded document, otherwise the copies will not
be printed as desired.
For details on specifying the document orientation,
refer to “Selecting the document orientation
(Original Direction settings)” on page 1-28.
*2
If “2 > 1” or “2 > 2” is selected, select the position of
the binding margin and the orientation of the loaded
document, otherwise the copies will not be printed
as desired.
Setting Description
1 > 1 Select this setting to produce single-sided copies
from single-sided documents.
1 > 2
*1
Select this setting to produce one double-sided
copy from two single-sided documents.
2 > 1
*2
Select this setting to produce two single-sided
copies from one double-sided document.
2 > 2
*1*2
Select this setting to produce double-sided copies
from double-sided documents.