Konica Minolta bizhub C451 - Manual (Page 83)

2 Using copy functions
2-40 C451
Using copy f
unct
ions
Chapter 2
2.11 Selecting the Paper settings
Selecting a Paper Type setting
If paper other than plain paper, such as OHP
transparencies or special paper, is loaded in a paper
tray, be sure to change the paper type setting for that
tray.
The following procedure describes how to specify the
setting for special paper loaded into the bypass tray.
2
Note
There are limits on the types of paper that can be loaded
in a paper tray. For details on the types of paper that can
be loaded, refer to the User’s Guide [Copy Operations].
2
Reminder
If special paper is loaded into a paper tray, be sure to
select the corresponding paper type for that tray,
otherwise a paper misfeed may occur.