Konica Minolta bizhub C451 - Manual (Page 51)

2 Using copy functions
2-8 C451
Using copy f
unct
ions
Chapter 2
2.3 Selecting the Paper settings
The paper size can be selected automatically
according to the document size or it can be specified
manually. Specify the paper size according to the
corresponding procedure, depending on the desired
copy settings.
Automatically selecting the paper size (“Auto”
Paper setting)
The size of the loaded document is detected, and
copies are produced using paper of the same size.
If the “Full Size” Zoom setting was specified, paper of
the same size as the document is selected.
If the zoom ratio was increased or decreased, a paper
size that corresponds to the specified zoom ratio is
automatically selected.
2
Note
The “Auto Zoom” setting and the “Auto” Paper setting
cannot both be selected at the same time. If the “Auto
Paper Select” was selected at the “Auto Zoom” setting,
the Zoom screen appears. Touch the button for the
desired zoom ratio.