Konica Minolta bizhub C451 - Manual (Page 62)

Using copy functions 2
C451 2-19
Using copy f
unct
ions
Chapter 2
– If “1 > 2” or “2 > 2” is selected, touch [Output
Bind Direction], select the binding position for the
copy, and then touch [OK].
– If “Auto” is selected, the binding position is set at
the top or on the left side. The binding position is
automatically determined according to the
orientation of the loaded document. If the
document length is 11-11/16 inch (297 mm) or
less, a binding position along the long side of the
paper is selected. If the document length is more
than 11-11/16 inch (297 mm), a binding position
along the short side of the paper is selected.
4
Touch [Close].
The Basic screen appears again.