Konica Minolta bizhub C451 - Manual (Page 121)

3 Using fax/scan functions
3-20 C451
U
s
in
g fax
/sc
an
f
u
n
c
tio
n
s
Chapter 3
– When typing in a fax number:
[Tone]: If pulse dialing is being used, touch this
button to send a push-button tone. This is
used when a fax information service is being
used. “T” appears in the screen. If pulse
dialing is being used, use [
] to switch to a
push-button tone.
[Pause]: Touch this button to insert a pause
when dialing. Touch [Pause] once to insert a 1-
second pause. In addition, multiple pauses
can be entered. “P” appears in the screen. If
the PBX (private branch exchange) connection
is enabled, touch [Pause] after the outside line
access code (for example, “0”) for reliable
dialing when transmitting from an inside line to
an outside line. “P” appears in the screen.
[–]: Touch this button to insert the dash as
separator symbol while dialing. This has no
effect on the dialing. “–” appears in the screen.
– To change a character in the entered text,
touch [
←] and [→] to move the cursor to the
character to be changed, and then touch
[Delete].
3
Touch [OK].
– If a destination registration number is entered,
touch [OK], and then touch [OK] in the next
screen that appears.