Konica Minolta PageScope Box Operator - Manual (Page 31)

Connecting to the Multifunctional Product 4
Box Operator 4-14
3
Type in the connection information.
– The information can be entered by searching for a connection. Click
[Search for device] to display a list of multifunctional products on
the network.
– In the "Registration name" box, type the name of the multifunctional
product.
– In the "Device address" box, type the address (IP address or host
name) for the multifunctional product to be connected to.
– The numbers of the ports used with the TCP socket interface
appear in the "TCP socket setup" group box. These settings must
be the same as those specified on the multifunctional product. For
details on the settings specified on the multifunctional product,
contact the administrator of the multifunctional product. To change
the settings, click [Edit].
4
Click [OK].
The entered information is added to the "Registered device list" list.