Konica Minolta bizhub 20P - Manual (Page 17)

Configuring your machine for a network
11
2
c Double-click the unconfigured device.
Note
• If the print server is set to its factory default settings (if you don’t use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and MAC Address (Ethernet Address) by printing out the Printer Settings
Page.
See Printing the Printer Settings Page on page 14.
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
e Click OK.
f
With the correctly programmed IP address, you will see the KONICA MINOLTA print server in the device
list.
Windows
® Macintosh
Windows
® Macintosh