Konica Minolta bizhub 750 - Manual (Page 167)

6 Control Panel Settings
6-20 bizhub 750/600
Control Panel Settings
Chap
te
r 6
5
To overwrite the data, touch [Yes].
– To return to the Overwrite All Data screen without overwriting the
data, touch [No].
The message “Overwriting all data was completed. Turn OFF main SW
and ON” appears.
6
Follow the instructions in the screen to restart the machine.
The data on the hard disk is overwritten.
2
Reminder
While the data is being overwritten, do not use the main power switch to
turn the machine off and on.
When turning the main power switch OFF then ON, wait for 10 seconds
or longer before turning it ON again; otherwise the copier may not func-
tion normally.