beautypg.com

Turning the scanner on/off -4, Turning on the power switch -4, Turning off the power switch -4 – Konica Minolta PS7000C MKII User Manual

Page 62: Power saving features -4, 2 turning the scanner on/off, 1 turning on the power switch, 2 turning off the power switch, 3 power saving features

background image

PS7000C MKII Operator’s Manual

2 Turning the Scanner ON/OFF

2.1 Turning on the power switch

1

Check that the Scanner is firmly connected to the personal computer with the
USB cable, and press the power switch of the Scanner on (“I” position).

NOTE !

Turn the power switch of the Scanner on before the personal
computer is powered on.

2.2 Turning off the power switch

1

Press the switch off (“O” position).

NOTE !

Never turn the power switch off while the Scanner is scanning the
original.

Turn off the personal computer before turning off the Scanner.

2.3 Power saving features

If left without any operation for 15 minutes after turning the power switch ON, the
operation panel and fluorescent lamp turns off , the LED lamp flashes in green, and
the Scanner goes into the energy saving mode.
For resetting to the normal state, press any button on the menu screen of the
personal computer.

NOTE !

When the “Scan” button on the menu screen is pressed, the
Scanner returns to the normal state, and starts scanning.

When any key on the operation panel is pressed, the Scanner
returns to the normal state.

When using the manual switch, press the switch once, and then
the Scanner returns to the normal state.

4-4