Konica Minolta PS7000C MKII - Manual (Page 4)

WARNING
● Do not modify product, as a fire, electrical shock, or breakdown could result. If
the product employs a laser, the laser beam source could cause blindness.
● Do not attempt to remove the covers and panels which have been fixed to the
product. Some products have a high-voltage part or a laser beam source inside
that could cause an electrical shock or blindness.
● Only use the power cord supplied in the package. Failure to use this cord could
result in a fire or electrical shock.
● Use only he specified power source voltage. Failure to do that could result in a
fire or electrical shock.
● Do not use a multiple outlet adapter to connect any other appliances or
machines. Use of power outlet for more than the marked current value could
result in a fire or electrical shock.
● Do not unplug and plug in the power cord with a wet hand, as electrical shock
could result.
● Plug the power cord all the way into the power outlet. Failure to do this could
result in a fire or electrical shock.
● Do not scratch, abrade, place a heavy object on, heat, bend, pull on, or damage
the power cord. Use of a damaged power cord (exposed core wire, broken
wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your
authorized service representative.
● In principle, do not use an extension cord. Use of an extension cord could
cause a fire or electrical shock. Contact your authorized service representative
if an extension cord is required.
● Do not place a flower vase or other container that contains water, or metal clips
or other small metallic objects on this product. Spilled water or metallic objects
dropped inside the product could result in fire, electrical shock, or breakdown.
Should a piece of metal, water or any other similar foreign matter get inside the
product, immediately turn OFF the power switch, unplug the power cord from
the power outlet, and then call your authorized service representative.
ii