Precautions for installation and operation -4, Operating environment -4, Precautions when operating the scanner -4 – Konica Minolta PS7000C MKII User Manual
Page 20: 2 precautions for installation and operation, 1 operating environment, 2 precautions when operating the scanner, 3 precautions when operating the personal computer
PS7000C MKII Operator’s Manual
2 Precautions for Installation and Operation
2.1 Operating environment
The following environment is required for consistent performance of the Scanner:
Temperature: 50 to 95°F (10 to 35°C) with temperature variation not exceeding
18°F (10°C) per hour
Humidity: 15 to 85%RH with humidity variation not exceeding 20% per hour
2.2 Precautions when operating the Scanner
Observe the following precautions to ensure the optimum performance of the
Scanner:
◆
NEVER wear white clothing since its reflection may alter the illuminance of
the book surface.
NEVER place any object other than the original on the book table or apply
excessive pressure to the book table.
NEVER use the glass plate unit with 3D objects other than sheet and book
documents. Also NEVER place anything on top of the glass plate unit, or
subject it to impact.
NEVER turn the power switch off during operation.
◆
NEVER make any large movements such as standing up or sitting down while
the book is being scanned. (This is necessary in order to stabilize the
illuminance on the book.)
NEVER bring any magnetized object or use flammable sprays/liquids near the
Scanner.
NEVER place a vase or vessel containing water on the Scanner.
NEVER drop paper clips, staples, or other small pieces of metal into the
Scanner. If this occurs, contact your authorized dealer.
NEVER remove the fixed outer cover.
ALWAYS completely insert the power cord plug into the power outlet.
NEVER place an object on the lamp unit.
ALWAYS make sure that the outlet into which the power cord plug is inserted is
visible.
NEVER use this device with power cords or USB cables for other electrical
devices.
IMMEDIATELY turn the power switch off, unplug the power cord, and call
your authorized dealer for appropriate action when the power cord or USB
cable of the Scanner has been damaged.
ALWAYS be sure to turn the power switch off, unplug the power cord, and call
your authorized dealer for appropriate action when the Scanner becomes
excessively hot or produces abnormal noise.
2.3 Precautions when operating the personal computer
Refer to the operation manual provided for the personal computer.
1-4