Konica Minolta PS7000C MKII - Manual (Page 34)

PS7000C MKII Operator’s Manual
2.2 Disabling User Account Control
If the User Account Control is enabled when operating under the Windows Vista or
Windows 7 environments, be sure to disable the User Account Control setting
before starting the setup procedure. After the procedure is completed, be sure to
return the setting to enable.
Be sure to perform the procedure with the authority of the System Administrator.
NOTE ! • Displayed screens may be different depending on the OS of your
PC
• Be sure to do this procedure with the Scanner in the OFF
condition.
The following example applies when using a PC running under the Windows Vista
environment.
1 Select “Start” and then “Control Panel”.
2 Click “User Accounts” on the “Control Panel” screen.
3 Type “UAC” in the Search area located in the upper right hand corner and
press “Enter”.
3-8