Konica Minolta PS5000C - Manual (Page 50)

PS5000C Operator’s Manual
4-4
3 Placing the original
For a book original
Place the original face up on the book table, aligning the top edge of the book
against the stopper, and the spine of the book with the center mark.
For a sheet original
Place the original face up on the book table, aligning the top edge of the sheet
original against the upper stopper, and the right side edge of the sheet against the
right side stopper.
For a 3D object
Place the 3D object face up on the book table. When the object is small, it should
be placed on the right side of the book table if possible to minimize the scan size. It
is also recommended to place a white sheet underneath the 3D object to obtain
optimum exposure setting.
Center mark