Konica Minolta bizhub 20P User Manual

Page 61

Driver and Software

Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep
mode, the printer acts as though it were turned off. When you choose Printer Default the timeout
setting will be 1 minute.
While the printer is in sleep mode, all the LEDs are off, the Status LED lights up slightly, but the printer
can still receive data. Receiving a print file or document or pressing Go will automatically wake up the
printer to start printing.

Halftone Screen Lock
Stops other applications from modifying the Halftone settings. The default setting is On.

High Quality Image Printing
You can get high quality image printing. If you set High Quality Image Printing to On, the printing
speed will be slower.

Reduce Paper Curl
If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you do
not need to choose this setting. We recommend that you change the printer driver setting in Media
Type to a thin setting.

Improve Toner Fixing
If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide
enough improvement, select Thicker Paper in Media Type settings.

Density Adjustment
Increase or decrease the print density.