Konica Minolta bizhub 20P - Manual (Page 53)

Driver and Software
43
3
Accessories tab
3
Note
From the Start menu, select Control Panel and then Printers and Faxes
1
. Right-click the KONICA
MINOLTA bizhub 20P icon and select Properties to access the Accessories tab.
1 Printers for Windows ® 2000 users.
When you install the optional accessories, you can add and choose their settings in the Accessories tab as
follows.
„ Available Options (1)
You can manually add and remove the options that are installed on the printer. Tray settings will match
the installed options.
„ Paper Source Setting (2)
This feature identifies the paper size defined for each paper tray.
• Paper Size
This setting allows you to define which paper size is used for each tray. Highlight the tray you want to
define and then choose the paper size from the pull-down menu. Click Update to apply the setting to
the tray. When using more than one paper size you must define the paper size for each tray so the
paper is pulled from the correct tray.
• Default Source
This setting allows you to choose the default paper source that your document will be printed from.
Choose the Default Source from the pull-down menu and click Update to save your setting. The Auto
Select setting will automatically pull paper from any tray that has a defined paper size that matches
your document.
!
"