Konica Minolta bizhub 20P User Manual

Page 34

Printing Methods

When you have finished printing, reset the two gray levers which are pulled down at step b back to the
original position.

Note

• Remove each sheet or envelope at once after printing. Stacking the sheets or envelopes may cause the

paper to jam or curl.

• If envelopes get smudged during printing set the Media Type to Thick Paper or Thicker Paper to

increase the fixing temperature.

• If envelopes are creased after they are printed, see Improving the print quality on page 124.
• (For Windows

users) If DL size double flap envelopes are creased after printing, choose DL Long Edge

in Paper Size, from the Basic tab. Put a new DL size double-flap envelope in the MP tray with the
longest edge of the envelope in first, then print again.

• When you put paper in the MP tray, remember the following:

• Put the leading edge (top of the paper) in first and push it gently into the tray.
• Make sure that the paper is straight and in the proper position in the MP tray. If it is not, the paper may

not be fed properly, resulting in a skewed printout or a paper jam.