Konica Minolta bizhub C250 - Manual (Page 65)

2 Using copy functions
2-28 C250
Using copy f
unct
ions
Chapter 2
*1
If no finisher is installed and all of the following
conditions are met, printed copies can be fed out
and sorted in an alternating crisscross pattern.
– 8-1/2×11- or 5-1/2×8-1/2-size paper is used.
– Paper of the same size and type is loaded with the
w orientation in one paper tray and with the v
orientation in another tray.
– The “Auto Paper Select” setting is selected.
– The “Auto Paper Select” setting is not selected
when the “Mixed Original” setting is selected.
*2
If the “Corner Staple” or “2 Staples” setting is
selected, the “Sort” setting is automatically
selected. The “Corner Staple” or “2 Staples” setting
and the “Offset” setting cannot be used together.
Available Staple and Punch settings
The following procedure describes how to select
Finishing settings.
Finisher
FS-603 Finisher
FS-501 Finisher
FS-514
Staple settings
“Corner” & “2 Position” o — o
Staple setting
“Corner” o o o
Punch setting With punch
kit PK-501
installed
o
— With punch
kit PK-510
installed
o