Konica Minolta bizhub C250 - Manual (Page 34)

Before making copies 1
C250 1-25
Be
fo
re
m
a
k
ing
c
o
p
ies
Chapter 1
4
Touch the button for the orientation of the
loaded document, and then touch [OK].
– To cancel changes to the settings, touch
[Cancel].
Selecting the position of the binding margin
(“Margin” settings)
If a double-sided document is loaded into the ADF,
specify the position of the top of the back side of the
document by specifying the binding margin position for
the document.
Setting Description
Left Select this setting if the document that is loaded has
a binding margin on the left side.
Top Select this setting if the document that is loaded has
a binding margin at the top.
Right Select this setting if the document that is loaded has
a binding margin on the right side.