Konica Minolta bizhub C250 - Manual (Page 64)

Using copy functions 2
C250 2-27
Using copy f
unct
ions
Chapter 2
2.9 Selecting Finishing settings
Various settings can be selected for sorting and
finishing copies fed into the copy output tray.
The following Finishing settings are available.
Setting Description
Sort Select this setting to separate each set of a
multi-page document.
Group Select this setting to separate the copies of
each page in a multi-page document.
Offset
*1
Select this setting to feed out and sort
printed copies in an alternating crisscross
pattern if the sorting conditions are met when
no finisher is installed.
Select this setting to feed out and stack the
printed copies on top of each other with each
set shifted to separate it when a finisher is
installed.
Corner Staple
*2
Select this setting to bind the printed copies
with a staple in the corner.
2 Staples
*2
Select this setting to bind the printed copies
with two staples.
2/3-hole Punch Select this setting to punch holes (2 or 3
holes) in the printed copies for filing them.