Konica Minolta bizhub C250 - Manual (Page 45)

2 Using copy functions
2-8 C250
Using copy f
unct
ions
Chapter 2
2.3 Selecting a Paper setting
The paper size can be selected automatically
according to the document size or it can be specified
manually. Specify the paper size according to the
corresponding procedure, depending on the desired
copy settings.
Automatically selecting the paper size (“Auto Paper
Select” setting)
The size of the loaded document is detected, and
copies are produced using paper of the same size.
If the “×1.0” Zoom setting was specified, paper of the
same size as the document is selected.
If the zoom ratio was increased or decreased, a paper
size that corresponds to the specified zoom ratio is
automatically selected.
1
In the Basic screen, touch [Paper].
The Paper screen appears.