8 first-use settings, 1 must-set items (internet fax), First-use settings -12 – Konica Minolta bizhub 360 User Manual
Page 37: Must-set items (internet fax) -12
2
Before Use
2-12
Network Fax
Be
fo
re
Us
e
Chapter 2
2.8
First-Use Settings
2.8.1
Must-Set Items (Internet Fax)
!
Detail
When using the Internet fax function, this requires the service engineer to
make the setting. For details, contact your service representative.
For details, see "Utility Mode" on page 10-2.
After installation, you must set the following items to use the internet fax
functions. You will not be able to execute the FAX communication if these
items are not set properly.
-
Administrator/Machine Setting
–
Input Machine Address
-
Network Setting
–
TCP/IP Setting
–
Network Fax Function Settings > Internet Fax (ON/OFF*)
The Network Fax Setting is displayed on the 2/2 screen of the Network
Setting.
–
E-Mail Setting
E-Mail TX (SMTP)
E-Mail RX (POP)
-
Fax Setting
–
Header Information
The Header Information is normally shared with the G3 fax.
–
Network Fax Setting
Internet Fax RX Ability
I-Fax Advanced Settings
–
Report Settings
Network Fax RX Error Report (ON*/OFF)
MDN Message (Do not Print/Print*)
DSN Message (Do not Print*/Print)
Receipt Mail Text (Do not Print/Print*)
* indicates factory default setting.