Konica Minolta bizhub 360 - Manual (Page 194)

Utility Mode 10
Network Fax 10-13
Utility Mode
Chapter 10
10.2.16Administrator Setting >> Fax Setting >> Function Setting
Turns ON/OFF transmission/reception functions. (page 10-54)
For details of other items related to the Function Setting, see "User's Guide
(Facsimile Operations).
10.2.17Administrator Setting >> Fax Setting >> Report Settings
Sets the method to print a report. (page 10-59)
Item Description Available value
Fu
nct
ion ON/OFF Se
ttin
g
Destina-
tion
Check
Display
Function Set whether or not to display the list
of destinations specified at the time
of facsimile transmission. ON/ OFF
*
Memory RX The memory reception is the function
used to receive documents and store
in memory so that you can print them
out later as necessary. ON/ OFF
*
Item Description Available value
Activity Report Determines whether to print the report
and the timing at which the report will be
printed out. OFF / Daily / Every 100
Comm.
*
/ 100/Daily
When you set the output
of Activity Report to [Dai-
ly] or [100/Daily], you can
also set the time to out-
put the report.
TX Report ON / If TX Fails
*
/ OFF
Sequential TX
Report ON
*
/ OFF
Broadcast Re-
sult Report Set up the Broadcast Result Report
printing method. All Dest.
*
/1 Dest. at a
time
TX Result Re-
port Check Determines whether to display the trans-
mission result report select screen. If you
select “ON”, it will be displayed after
each transmission. OFF
*
/ ON
Network Fax
RX Error Report Determines whether to print the Network
Fax RX Error Report. ON
*
/ OFF