6 entering power save mode (fax), Entering power save mode (fax), Entering power save mode (fax) -23 – Konica Minolta bizhub 360 User Manual
Page 204
Utility Mode
10
Network Fax
10-23
Utility Mode
Chapter 10
10.6
Entering Power Save Mode (Fax)
Set the Entering Power Save Mode (Fax).
*
indicates factory default setting.
Entering Power Save Mode (Fax)
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2
Press [System Setting].
–
Some items may not be displayed depending on the optional
settings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [System
Setting], enter 1 through the numeric keypad.
3
Press [Power Save Setting].
Item
Description
Available value
Entering Power
Save Mode
(Fax)
If the [Immediately] have been selected and
it is power save mode when input signals
come, then power save mode will be re-
sumed after completion of reception.
Normal
*
/ Immediately