Konica Minolta bizhub C451 - Manual (Page 274)

Utility mode 9
C451 9-28
9.6 Setting initial setting value of fax function (Default
Scan/Fax Settings)
Initial setting value of Fax/Scan function can be set.
Fax/Scan functions selected when main power supply is turned ON or when
[Reset] key is pressed, can be set.
Default Scan/Fax Settings: Current Setting/ Factory Default*
- [Current Setting]
Each item set on the touch panel before entering the Utility mode is reg-
istered as initial setting of Fax/Scan function.
- [Factory Default]
The factory default is registered as initial settings of Fax/Scan function.
* is a default value at the time of purchase.
!
Detail
For this setting, display the Fax/Scan screen and then press the [Utility/
Counter].
Default Scan/Fax Settings
1
Refer to “Displaying User Settings screen” on page 9-3 to display User
Settings screen.
2
Touch [Scan/Fax Settings].
– Some items may not be displayed according to setting options.
– In the Utility mode, numbers displayed on buttons can be entered
and selected with the keypad. In case of [Scan/Fax settings], enter
[4] with the keypad.