Konica Minolta bizhub C451 - Manual (Page 257)

Utility mode 9
C451 9-11
Administrator Settings > Network Settings > E-Mail Settings > E-mail TX
(SMTP)
E-mail transmission (SMTP) is set. (page 9-56)
Other settings of E-mail TX (SMTP) are not used in Internet Fax. For details,
refer to the User’s Guide [Network Scanner Operations].
Item Description Values that can be set
E-Mail TX (SMTP) Whether or not to use E-mail
transmission (SMTP) func-
tion is set. ON*/OFF
Scan to E-mail Whether or not to use E-mail
transmission is set. ON*/OFF
SMTP Server Ad-
dress IP address and host name of
SMTP server are set. -
Connection Timeout Connection timeout is set. 30 - 300 (60 seconds*)
Server Capacity The maximum capacity for 1
E-mail that can be received
through SMTP server is set. 1 - 100 Mbyte / Unlimited*
Port No. The port number is set. 1 - 65535 (25*)
SSL Setting Select whether or not SSL is
used during Internet fax
transmissions. When SSL is
used, communication infor-
mation is encrypted. SMTP over SSL / Start TLS /
OFF*
If “SMTP over SSL” or “Start
TLS” is selected, specify a
setting for “Port Number
(SSL)” (between 1 and 65535
(465*)).
SMTP Authentica-
tion POP Before SMTP and
whether or not to carry out
SMTP authentication are set. ON/OFF*
Following settings are speci-
fied.
SMTP Authentication
POP Before SMTP Authenti-
cation: ON/OFF*
POP Before SMTP Time: 0 -
60 (5 seconds*)