Arturia JUPITER-8V 2 - Manual (Page 83)

ARTURIA – JUPITER-8V – USER’S MANUAL 83
BAND 4 (High frequencies)
FREQUENCY (F) Knob to set the band of the high frequencies
GAIN (G) Knob to set the gain for the band of the high frequencies
DRY/WET Knob to set the balance between the original signal and the output
of the effect
OUTPUT Knob for the PARAM EQ‘s output volume.
The LCD screen allows you to graphically show the positions of each band.
The “MOD” button allows accessing the modulation connections for each of the
parameters of the PARAM EQ as well as the choice of the sources of modulation:
• KEY FOLLOW
• VELOCITY
• AFTERTOUCH
• ENVELOPE 1
• ENVELOPE 2
• GALAXY Y
• GALAXY X
• LFO
• SEQUENCER
The “BYPASS” button allows deactivating the parametric equalizer effect.
Parametric EQ
7.4.4 Phaser
The PHASER effect provides a classic phasing sound similar to analog effects used in the
70's.
SWEEP START Knob to set the reference frequency
FEEDBACK Knob to set the feedback of the modulated signal
SWEEP AMOUNT Knob to set the amplitude of the modulation
SWEEP RATE Knob to set the speed of the modulation
DRY/WET Knob to set the balance between the original signal and the output of
the effect