Konica Minolta bizhub 160 - Manual (Page 74)

4.3 Specifying the Zoom Ratio 4
bizhub 160 4-11
Ma
ki
ng Copi
es
Ch
apte
r 4
Setting the Zoom Ratio
1 Position the original.
❍ “Loading Originals” on page 3-24
2 Press the [Zoom] key until the
desired fixed ratio is selected.
❍ Each press of the [Zoom] key
changes the setting.
❍ To specify a zoom ratio other
than a fixed ratio, press the [
▼]
and [ ▲] keys until the desired
zoom ratio is specified.
Pressing these keys change
the ratio in
× 0.01 increments.
✎
Tip
To quickly specify the desired
zoom ratio, select the nearest
fixed ratio, and then press the
[
▼
] and [
▲
] keys until the desired zoom ratio is specified.
3 Make the other necessary settings.
❍ “Adjusting the Image Density” on page 4-12
4 Using the 10-Key Pad, enter the number of copies to be made, and then press
the [Start] key.
LT
x1. 29
LT HL
x1. 28
LT