Konica Minolta bizhub 160 - Manual (Page 41)

3 3.4 Control Panel
3-10 bizhub 160
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
3.4 Control Panel
Names of Control Panel Parts and Their Functions
1 2 3 4 5 6 7 8
18 17 16 14 15 14 13 11 12 11 10 9
No. Part Name Description
1 [Utility] key Press to enter Utility mode.
For details, refer to “Using the Utility Mode” on page 5-1.
2 [Printer] key Press to enter Printer mode.
For details, refer to the User’s Guide for the printer controller.
3 Error lamp The indicator lights up in orange if an error or malfunction occurs.
For details, refer to “When a Message Appears” on page 6-1.
4 Display Shows the number of copies to be made, the zoom ratio, and other
setting date.
5 [No/C] key • Press to reset the number of copies to “1”.
• Press to clear the various settings.
• Press to return to the previous screen.
• Press to specify the various settings.
6 [Yes] key • Press to validate the setting just made.
• Press to specify the various settings.
7 10-Key Pad Use to type in the number of copies to be made and any other numeric
date.
8 [Stop] key • Press to stop a print cycle.
• Press to stop a scanning sequence.
• The indicator flashes in orange when the machine is paused or while
copying.
9 [Panel Reset] key Press to reset all copy functions and settings to their defaults.