Konica Minolta bizhub 160 User Manual
Konica Minolta Printers
Table of contents
Document Outline
- Contents
- Ch.1 Introduction
- 1.1 Safety Information
- 1.2 Regulation Notices
- CE Marking (Declaration of Conformity)
- For U.S.A. Users FCC Part 15-Radio Frequency Devices
- For Canada Users Interference-Causing Equipment Standard (ICES-003 Issue 3)
- For users in countries subject to Class B regulations
- For users in countries not subject to Class B regulations
- Laser Safety
- Internal Laser Radiation
- CDRH Regulation
- For European Users
- For Denmark Users
- For Finland, Sweden Users
- For Norway Users
- Laser Safety Label
- Ozone Release
- Acoustic Noise
- 1.3 Energy Star®
- 1.4 Trademarks and Registered Trademarks
- 1.5 Explanation of Manual Conventions
- 1.6 Explanation of Basic Concepts and Symbols
- Ch.2 Precaution
- Ch.3 Before Making Copies
- 3.1 Available Features
- 3.2 Components and Their Functions
- 3.3 Parts Names and Their Functions
- 3.4 Control Panel
- 3.5 Turning the Machine On/Off and the Initial Mode
- 3.6 Useful Functions
- 3.7 Copy Paper
- 3.8 Loading Originals
- Two Ways of Loading the Original
- Specific Types of Originals
- Loading Originals in the Automatic Document Feeder
- Precautions for Loading Paper Into the Automatic Document Feeder
- Loading Originals into the Automatic Document Feeder
- Placing the Original on the Original Glass
- Precautions for Placing the Original on the Original Glass
- Positioning a Sheet Original
- Positioning Highly Transparent Originals
- Positioning Books
- 3.9 Checking the Machine Status
- 3.10 Print Area
- Ch.4 Making Copies
- Ch.5 Using the Utility Mode
- 5.1 Utility Mode
- 5.2 Specifying the Machine Settings
- Selecting the “MACHINE SETTING” Menu
- Specifying the Setting for “AUTO PANEL RESET”
- Specifying the Setting for “ENERGY SAVE MODE”
- Specifying the Setting for “DENSITY (ADF)”
- Specifying the Setting for “DENSITY (BOOK)”
- Specifying the Setting for “PRINT DENSITY”
- Specifying the Setting for “LCD CONTRAST”
- Specifying the Setting for “LANGUAGE”
- Specifying the Setting for “LAMP OFF TIME”
- 5.3 Setting Up the Paper Sources
- 5.4 Specifying User Management Settings (“USER MANAGEMENT” Menu)
- 5.5 Specifying Copy Settings
- Ch.6 When a Message Appears
- 6.1 When the Message “PAPER EMPTY” Appears
- 6.2 When the Message “TONER EMPTY” Appears
- 6.3 When the Message “D/C LIFE” Appears
- 6.4 When the Message “PAPER MISFEED” Appears
- 6.5 When the Message “PAPER JAM” Appears
- 6.6 When the Message “ORIGINAL DOC. JAM” Appears
- 6.7 When the Message “PAPER SIZE ERROR” Appears
- 6.8 When the Message “MACHINE TROUBLE” Appears
- 6.9 What Does Each Message Mean?
- 6.10 When Incorrect Copies Are Produced
- 6.11 The machine is not functioning as designed
- Ch.7 Miscellaneous
- Ch.8 Index