Konica Minolta bizhub 4750 - Manual (Page 9)

[Fax Functions] 2-3
2.2 Operations required to use this function 2
2.2 Operations required to use this function
d
Reference
For details on how to set up the fax environment, refer to Chapter 4 "Initial Settings of This Machine" in [Quick
Start Guide].
Checking the modular cable connection
Check that a modular cable is connected between the LINE port and the relevant telephone line.
Use the TEL port to connect a telephone cord.
Telephone cable
- Connect a telephone cable with a ferrite core to the LINE (telephone line) Jack of this machine. (Con-
nect the modular jack on the ferrite-core-equipped end of the telephone cable to the telecommunica-
tion port.) In addition, connect a telephone cable with a ferrite core to the TEL (telephone) Jack.
(Connect the modular jack on the ferrite-core-equipped end of the telephone cable to the port for con-
necting a telephone.)
- If there is no ferrite core attached to the cable, radio wave reception failures for radios and televisions
may occur.
- Follow the instructions shown below to attach a ferrite core.
- Loop the cable through the ferrite core once.
- Ensure that the cable is not pinched by the ferrite core.
- Attach the ferrite core 20 mm (+/- 5 mm) away from the connector.
No. Name
1 TEL (telephone) Jack
2 LINE (telephone line) Jack
LAN
USB
TEL
LINE
1
2