Konica Minolta bizhub 4750 - Manual (Page 31)

[Fax Functions] 4-6
4.5 Sending a confidential fax ([F-Code TX]) 4
4.5 Sending a confidential fax ([F-Code TX])
Confidential communication
The confidential communication function is designed to communicate with specific people using a Confiden-
tial RX User Box that requires a registered number and a password.
This ensures that fax communications are sent with enhanced security.
Tips
- The destination fax must have the F-code function.
- You need to check the registration number of the recipient's Confidential RX User Box and the pass-
word for confidential fax reception in advance.
- This function cannot be used together with the following functions:
Password TX, Polling TX, Polling RX
Related setting (for the administrator)
You can specify whether or not to use the F-Code TX function.
To configure settings: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function
ON/OFF Setting] - [F-Code TX] (default: [ON])
Operation flow
1
Load the original.
2
Tap [Fax].
3
Specify the destination.
4
Tap [Application] - [Fax Setting] - [F-Code TX], then tap [ON].
5
Enter the [Sub Address] and [Password], then tap [OK].
% [Sub Address]: Enter the registration number of the Confidential RX User Box.
% [Password]: Enter the communication password for confidential RX.
6
Press the Start key.
Sending starts.