Tsi routing – Konica Minolta bizhub 4750 User Manual
Page 46
[Fax Functions]
6-4
6.3
Automatically distributing a received fax (TSI Routing)
6
6.3
Automatically distributing a received fax (TSI Routing)
TSI Routing
TSI (Transmitting Subscriber Identification) Distribution automatically forwards a received fax to the pre-
specified destination (SMB, FTP, or E-mail (Internet fax) destination) based on the sender's fax number (TSI).
There is no need to sort printed faxes for each recipient and no risk of missing a fax. To use the TSI Routing
function, specify forward destinations in advance. Routing destinations can be registered for up to 128 fax
numbers (TSIs).
Tips
-
The file type for forwarding is TIFF.
-
If a fax with an unregistered fax number (TSI) and without a forwarding destination is received, the Mem-
ory RX function is activated to store the fax in the memory on this machine. For details on how to print
received faxes, refer to page 6-6.
-
TSI Routing function cannot be used together with the following functions.
Memory RX, Forward TX, PC-Fax RX, Night RX
Operations required to use this function (for administrators)
To use TSI Routing, the following settings are required.
-
Select [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [TSI User Box Setting] -
[Enable Settings], then enable the TSI Routing function (default: [OFF]).
-
Select [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [TSI User Box Setting] -
[TSI User Box Registration], then register the fax numbers of (TSI) of the senders to be sorted and the
sorting destination.
-
Select [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [TSI User Box Setting] -
[Print After Receive], then specify whether or not to print the received fax on this machine (default: [No]).
-
Select [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [TSI User Box Setting] -
[Action when TSI User Box is not set.], then specify the operation when the fax in which forwarding des-
tinations are not assigned is received (default: [Automatically Print]).