Konica Minolta magicolor 5650 - Manual (Page 62)

Configuration Menu Overview 48
FIN-
ISHING Settings SUB TRAY/MAIN TRAY/OFFSET/STAPLING
When SUB TRAY is selected, the paper is fed to the sub output
tray.
When MAIN TRAY is selected, the paper is fed to the main out-
put tray.
When OFFSET is selected, the paper is fed to the main output
tray with each copy slightly shifted.
When STAPLING is selected, each copy is stapled and fed to the
main output tray.
The setting specified in the printer driver will override this menu
setting.
JOB
SEPA-
RATION Settings ON/OFF
The paper is fed to the main output tray with each print job slightly
shifted.
"
If FINISHING is set to SUB TRAY , the print jobs are fed
out stacked on top of each other without begin shifted.
"
If FINISHING is set to STAPLING , the print jobs are
stapled before being fed out.
IMAGE
ROTA-
TION Settings ON/OFF
If ON is selected, the image is rotated 180 degrees before each
copy is fed out. If OFF is selected, the image is not rotated.
"
If PAPER TYPE is set to ENVELOPE , the image cannot be
rotated.