Konica Minolta magicolor 5650 - Manual (Page 27)

Selecting Driver Options/Defaults (for Windows) 13
"
If Memory Card is selected, select Disable, Enable (1 GB
Under), or Enable (1 GB Over), according to the installed Com-
pactFlash card.
"
If Paper Source Unit 2 is selected, select Standard or MPC,
according to the installed Tray.
Select Standard if the 500 sheet tray is installed for Paper Source
Unit 2. Select MPC if the 250 sheet tray is installed for Paper
Source Unit 2.
7
Click Apply.
"
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
8
Select the General tab.
9
Click Printing Preferences.
Printing Preference dialog box appears.
10
Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
11
Click Apply.
12
Click OK to exit from the Print preference dialog box.
13
Click OK to exit from the Properties dialog box.