Konica Minolta magicolor 5650 - Manual (Page 252)

Status, Error, and Service Messages 238
Error Messages (Warning: )
"
“I-UNIT” in a message refers to the print unit.
REBOOTING The printer is being
restarted. No action needed.
WARMING UP The printer is warming up.
OFFLINE The printer is offline. To print on a
network, change
the TELNET
setting so it is
online.
This message... means... do this...
FUSER UNIT
END OF LIFE The fuser unit has
reached the end of its
life. Contact Technical Sup-
port with the error infor-
mation.
HDD
NEAR FULL The hard disk is
nearly full. Delete print jobs or
resources (fonts, forms,
etc.) which saved on the
hard disk.
INCORRECT
HDD Since the hard disk
drive was formatted
with a different
machine, the hard
disk drive could not
be used. Replace the hard disk
drive with one
compatible with this
machine, or select
HDD
FORMAT from SYS
DEFAULT MENU and
format the hard disk.
INCORRECT
MEMORY CARD Since the
CompactFlash card
was formatted with a
different machine, the
CompactFlash card
could not be used. Replace the
CompactFlash card with
one compatible with this
machine, or select
CARD FORMAT from
SYS DEFAULT MENU
and format the
CompactFlash card.
INCORRECT
I-UNIT X The X print unit is an
unapproved type. Install a KONICA
MINOLTA print unit of
the appropriate type
(AM, EU, AP or GC).
See page 161.
This message... means... do this...