Transparencies, Transparencies 116 – Konica Minolta magicolor 5650 User Manual
Page 130
Media Types
116
Transparencies
"
Do not fan transparencies before loading them. Resulting static elec-
tricity may cause printing errors.
"
If you touch the face of the transparencies with your bare hands, print
quality may be affected.
"
Keep the printer path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 9, “Maintaining the Printer” .
"
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing envi-
ronment.
Try printing your data on a sheet of plain paper first to check placement.
"
If you have problems feeding 20 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, thus causing feeding problems.
"
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
Approved for laser printing
Capacity
Tray 1
(Manual Feed
Tray)
Up to 20 transparencies, depending on their
thickness
Tray 2
500 sheet tray: Not supported
250 sheet tray: Up to 20 sheets, depending
on the paper weight.
Tray 3/4
Not supported
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2
Face up
Driver
Media Type
Transparency
Duplexing
Not supported
Glossy
Mode
Not supported