Konica Minolta bizhub 4750 - Manual (Page 29)

2.3 How to send 2
[Scan Functions] 2-7
4
Tap [Application], then configure scan option settings.
% Before scanning the original on this machine, specify the size of the original to be scanned. If you
fail to set the original size correctly, the image may be cut off. For details on how to specify the orig-
inal size, refer to page 1-12.
% For details on configuring option settings, refer to the respective columns of the following table.
5
Press the Start key.
% Tap [Check Settings] before sending data, and check the specified destination and settings if nec-
essary.
% To redo operations for specifying destinations or option settings, press the Reset key.
% If you press the Stop key while scanning the original, scanning stops. To cancel scanning the orig-
inal, delete inactive jobs from the Job screen.
Sending starts.
d
Reference
It is convenient to register frequently used destinations in a program. For details on the program, refer to
page 1-5.
Related setting
If necessary, you can change the default of the Scan to E-mail screen.
To configure settings: [Utility] - [User Settings] - [Custom Display Settings] - [Scan/Fax Settings] - [Scan to E-
mail Default Tab] (default: [Favorites]).
Purpose Reference
To configure basic options such as color and original size page 1-12
To specify the method to scan the original page 1-14
To adjust the image quality or density depending on the contents of the original page 1-15