Konica Minolta bizhub C3850 User Manual
Page 61
5-22
bizhub C3850/C3350
Registering a destination
5
5.6
[E-mail]
[SMB]
Tips
-
To check the settings for a registered destination, select its registered name, then tap [Check Settings].
-
To change the settings for a registered destination, select its registered name, then tap [Edit].
-
To delete a registered destination, select its registered name, then tap [Delete].
Settings
Description
[No.]
Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name]
Enter the destination name (using up to 72 characters).
[Favorites]
Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorites], enabling you to easily specify a destination.
[Index]
Select a corresponding character so that the destination can be index
searched by name.
[E-mail]
Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
Settings
Description
[No.]
Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name]
Enter the destination name (using up to 72 characters).
[Favorites]
Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorites], enabling you to easily specify a destination.
[Index]
Select a corresponding character so that the destination can be index
searched by name.
[Connection]
Register information of the destination computer.
[Host Name]
Enter the host name or IP address of a destination computer.
•
Example of computer name (host name) entry: "HOME-PC"
•
Example of IP address (IPv4) entry: "192.168.1.1"
•
Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path]
Enter the shared folder name of the computer specified in [Host Name] (using
up to 255 bytes).
•
Entry example: "scan"
When specifying a folder in the shared folder, insert a symbol, "\", between
folder names.
•
Entry example: "scan\document"
[User ID]
Enter the name of a user who has privileges to access the folder specified in
[File Path] (using up to 255 bytes).
•
For workgroup user, only type in the user name. Entry example: "User01"
•
For domain user, type in user-name@domain-name. Entry example: "Us-
[email protected]"
[Password]
Enter the password (using up to 127 bytes).
[Browse]
Detect the target computer on the network, then select the shared folder.
Information of the selected folder is registered.