3 introduction of fax transmission function, 4 introduction of fax receiving function, Introduction of fax transmission function -14 – Konica Minolta bizhub C3850 User Manual
Page 53: Introduction of fax receiving function -14
5-14
bizhub C3850/C3350
Using the fax function
5
5.3
5.3.3
Introduction of fax transmission function
This section describes convenient fax transmission functions. For details on how to use each function, refer
to Chapter 4 in [User's Guide Fax].
5.3.4
Introduction of fax receiving function
This section describes the convenient fax receiving functions. For details on how to use each function, refer
to Chapter 6 in [User's Guide Fax].
Function
Overview
Timer TX
Timer TX automatically starts sending at a specified time if the time is pre-
specified.
Check Dest. & Send
Check Dest. & Send checks the fax number specified for the fax transmission
against the destination fax number (CSI) and sends the fax only when they
match.
F-Code TX
F-Code TX specifies the F code (SUB address and sending ID) to send a fax.
Confidential communication and relay distribution request are available.
•
The confidential communication function is designed to communicate with
specific people using a Confidential RX User Box that requires a registered
number and a password.
•
Relay distribution request is a function that the relay station, which has re-
ceived a fax, distributes the received fax to a pre-registered group.
Quick Memory TX
Fax transmission starts concurrently with scanning one page. The total num-
ber of pages transmitted can be entered in the sender record.
Password TX
Password TX sends a fax with a password. It is used to send faxes to a device
on which fax peers are restricted by passwords (a device with Closed Network
RX enabled).
Polling TX
Polling TX stores a file beforehand on the internal hard disk and sends it out
upon a request for reception (polling request) from the recipient.
Function
Overview
In-memory proxy re-
ception
When the machine cannot print a received fax due to paper jam or exhaustion
of consumables, this function stores the received fax in memory until this ma-
chine is ready to print.
TSI Routing
TSI (Transmitting Subscriber Identification) Routing automatically forwards a
received fax to the pre-specified destination (SMB, FTP, or E-mail (Internet fax)
destination) based on the sender's fax number (TSI).
Forward TX
Forward TX transfers a received fax to a pre-specified destination (fax, E-mail,
or Internet fax destination).
Memory RX
Memory RX saves a received fax in this machine's memory without printing it.
You can check the contents of the received fax and print out only the required
one.
Confidential RX
Confidential RX is designed to communicate with specific people using a Con-
fidential RX User Box that requires the registration number and password.
Closed Network RX
Closed Network RX restricts the peers by passwords.
Polling RX
Polling RX receives a polling file saved in a sending machine as instructed from
this machine.
PC-Fax RX
PC-Fax RX saves the received fax in memory. The saved fax can be printed or
downloaded, if necessary.
Night RX
Night RX prohibits printing of faxes received in the pre-specified nighttime
zone.