Konica Minolta BIZHUB C253 User Manual
Page 42
C253/C203
2-31
Administrator Operations
2
4
Enter the new 20-digit Encryption Key from the keyboard and keypad.
–
Press the [C] key to clear all characters.
–
Touch [Delete] to delete the last character entered.
–
Touch [Shift] to show the upper case/symbol screen.
–
Touch [Cancel] to go back to the HDD Settings screen.
5
Touch [OK].
?
What happens if the Encryption Key entered does not meet the requirements of the Password
Rules?
% If the Encryption Key entered does not comply with the Password Rules, a message appears that
tells that the Encryption Key entered cannot be used. Enter the correct Encryption Key. For details
of the Password Rules, see
.
6
To prevent entry of a wrong Encryption Key, enter the 20-digit Encryption Key once again.
–
Press the [C] key to clear all characters.
–
Touch [Delete] to delete the last character entered.
–
Touch [Shift] to show the upper case/symbol screen.
–
Touch [Cancel] to go back to the HDD Settings screen.
7
Touch [OK].
?
What if there is a mismatch in the Encryption Keys?
% If there is a mismatch in the Encryption Keys, a message appears that tells that there is a mismatch
in the Encryption Keys. Perform steps 4 through 7 once again.