Konica Minolta BIZHUB C360 - Manual (Page 26)

bizhub C360/C280/C220 3-15
3.3 Installation using Add Printer Wizard 3
19
Follow the instructions on the pages that follow.
% If the [Windows Logo testing] or [Digital Signature] window appears, click [Continue Anyway].
% If both [RAW Port Number] and [LPD Setting] are enabled in the network settings for this machine,
check the enabled port, and then change it if necessary. For details, refer to the [User's Guide Print
Operations].
20
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Printers
and Faxes] window.
21
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.
3.3.4 Windows 2000/NT 4.0
Reference
- Installing the driver to Windows 2000/NT 4.0-based computers requires the administrator authority.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
Click [Start], and then select [Settings] - [Printers].
3
Double-click the [Add Printer] icon.
[Add Printer Wizard] appears.
4
Follow the instructions on the pages that follow.
5
On the page for specifying how the printer is attached, select [Local printer].
6
Click [Next >].
A page for selecting a port appears.
7
Click [Create a new port:], and then select [Standard TCP/IP Port] as the type of port.
% In Windows NT 4.0, from the [Available Printer Ports] list, select [LPR Port], and then click [New
Port...]. For details, refer to the [User's Guide Print Operations].
8
Click [Next >].
[Add Standard TCP/IP Printer Port Wizard] starts.
9
Click [Next >].